- Global supply and technical support
- Metal packaging · Printing · Machinery
Sheet-fed, web, UV, spot-colour and special-effect offset ink solutions selected around your press, paper or board, drying system and finished-print requirements.
Supplied and technically supported by Lembos Global for packaging and commercial printers across the Middle East.
The correct ink depends on the press, substrate, colour target, drying route, finishing process and required production speed.
Matched to the printed job and production route.
Considered against paper, board and press conditions.
Reviewed for set-off, rub, varnish and conversion.
From requirement review through trial discussion.
Start with the press and drying system used on your line. Final selection is reviewed against the substrate, job, colour and finishing process.
CMYK process solutions for packaging, commercial, label and publication printing on paper and board.
Selection focus: press speed · coated or uncoated stock · drying · gloss and rub resistance
Ink routes for continuous high-volume commercial and publication production with repeatable colour performance.
Selection focus: heatset or coldset · paper stock · press speed · folding and finishing
Rapid-curing offset systems for coated stock, specialised substrates and demanding finishing schedules.
Selection focus: lamp system · curing capacity · substrate · adhesion and finishing
Compare our two featured sheet-fed process ranges, then explore the wider offset portfolio. The printed result remains the visual focus throughout.
Soy-based sheet-fed process ink
A four-colour process range for coated and uncoated paper, commercial print and publication work.
Consistent colour · good gloss · reliable drying · stable press performance
High-volume CMYK production
A cost-to-performance range for commercial print, paper labels, books and coated or uncoated board packaging.
Ink-water stability · strong density · rub resistance · high-volume value
For high-volume publication and commercial work on continuous web-offset production lines.
Repeat consistency · fast production · clean folding and finishing
For fast curing, sharp print and durable surfaces on coated stock and suitable specialised substrates.
Instant cure · fine detail · gloss · rub resistance
For customer colour references, solid brand colours and packaging areas requiring controlled colour consistency.
Accurate solids · clean coverage · repeatable colour matching
For promotional print and selected packaging details that require vivid, attention-led colour.
Visual impact · bright colour · controlled solid reproduction
For premium print details requiring reflective gold or silver ink effects without copying branded artwork.
Metallic character · smooth laydown · defined detail
For point-of-purchase displays, promotional graphics and customer-specific paper-based print effects.
High-impact colour · special finish · display durability
Colour alone is not enough. We review how the ink must transfer, dry, resist handling and perform through finishing.
Coated, uncoated, recycled, label or carton stock.
Sheet-fed or web, press model, speed and colour units.
Oxidative drying, heatset, coldset or UV equipment.
Varnishing, lamination, folding, die-cutting or binding.
CMYK, customer colour reference, metallic, fluorescent or special effect.
Existing ink, printed sample or production issue where available.
These factors guide the discussion. Final suitability is confirmed against the customer’s production conditions and trial requirements.
Reviewed for clean running and controlled emulsification.
Considered for reference matching and production repeatability.
Evaluated for press conditions and the required printed result.
Matched to the press, stock and finishing schedule.
Considered for pile conditions and turnaround targets.
Reviewed for handling, conversion and finished-use demands.
Considered for multicolour sequence and solid overprint.
Reviewed as part of the complete printed and protected system.
Production speed and process control remain part of selection.
Share the stock, press, drying route, finishing process and finished-use conditions. We will guide the suitable ink route through the existing enquiry rather than a separate product page.
For challenging coverage, colour strength or background conditions.
For distinctive finishes reviewed with print and finishing conditions.
Matched to the press, lamp system, stock and production speed.
For demanding conversion, handling or finished-use performance.
Detailed press-property data, compliance documents and commercial terms are provided after the application and production conditions have been reviewed.
Share the printing process, press, substrate and required print results. We will begin from the application details you know.
01 · Press and printing route
02 · Current ink or printed sample
03 · Drying and finishing process
04 · Print result and performance priority
Three practical stages keep the discussion focused while product mapping and manufacturing information remain private.
Provide the job type, paper or board, press, drying system, colour and finishing requirement.
We clarify the suitable technology, performance priorities, product range, performance priorities and trial conditions.
A suitable ink route, reference-matching discussion and commercial offer are prepared.
Metal packaging and printing solutions for can makers, printers and packaging manufacturers across the Middle East.
© 2026 Lembos Global. All rights reserved.Designed by Akaeid Hasan
Metal Packaging · Printing · Production Solutions